1Z. Kovziridze, 2N.Nijaradze, 3G. Tabatadze, 4T. Cheishvili, 5N. Darakhvelidze
1,2,3,4,5Georgian Technical University, Institute of Bionanoceramics and Nanocomposite Technology, Bionanoceramics and Nanocompo-site Materials Science Center, Georgia, 0175, Tbilisi, Kostava Str. 69
DOI : https://doi.org/10.47191/ijmra/v7-i05-51Google Scholar Download Pdf
ABSTRACT:
Goal - to receive on first stage β - SIALON containing nanocomposites by reactive sintering method at 14000C, with nitrogen pro-cess from origin composition in TiC-BN-SiC-B4C-Si-Al-Al2O3 (nanopowder) system. By using this method of synthesis, it became possible to receive nanocomposites with different percentages of β - SIALON. Our task was to study the phase composition of re-ceived consolidated materials in the TiC-TiB2-BN-SiC-B4C-β-SiAlON-Al2O3 (nanopowder-400nm.) system.
Method. The obtained mass was grounded in an attritor and the consolidated composite was obtained by hot pressing at 16200C during 40 minutes, with glass perlite (Armenia) dope 2 mass%, delaying at final temperature for 8 min, under 30 MPa pressure and vacuum – 10-3 Pa. Perlite from Aragatc contained 96 mas. % glass.
To study the phase composition of the composites, we conducted an X-ray structural analysis on the DRON-3 device. And to study the microstructure, we conducted research on an optical microscope -AC100 and a raster electron microscope “Nanolab 7” of the company "OPTON”. The values of the electrical parameters of the studied composites were calculated on the basis of the ob-tained "lgp- t" dependence. We have studied mechanical properties.
Result. In TiC-TiB2-BN-SiC-B4C- β-SiAlON-Al2O3 – C Carbon Fiber system we obtained nanocomposites with high mechanical proper-ties. The advantage of this method is that compounds, which are newly formed thanks to interaction going on at thermal treat-ment: Si3N4, Si, AlN are active, which contributes to β-SiALON formation at relatively low temperature, at 1300-13500C. It is evi-dent that inculcation of ALN in crystal skeleton of ß-Si3N4 is easier since at this temperature interval crystal skeleton of Si3N4 is still in the process of formation. ß-SiAlON was formed at 14500C. Part of boron carbide was transformed into boron nitride in ni-trogen environment and in titanium diboride, which in the case of both composites is in small quantities.
Conclusion. The phase composition of the obtained composite provides high physical-technical and performance properties of these nanocomposites. Compression strength-2198 MPa, Bending strength-271 MPa, Thermal expansion coefficient a20-700-3.8 10-6 0C.
nanocomposite; hot press; electron microscope; phase composition; B4C-BN-TiC-TiB2-SiC-β-SIALON-Al2O3 nano-powder system.
REFERENCES1) Osman Sahin, Orhan Uzun, Malgorzata Sopicka-Lizer, Hasan Gocmez, Ugur Kolemen. Dynamic hardness and elastic modu-lus calculation of porous SiAlON ceramics using depth-sensing indentation technique. Journal of the European Ceramic Society 28 (2008) p.1235–1242.
2) Z. Hou, F. Ye, L. Liu, - Effects of pore shape and porosity on the dielectric constant of porous β-SiAlON ceramics, J. Eur. Ceram. Soc. 35 (2015) 4115–4120.
3) G.J. Zhang, J.F. Yang, T. Ohji, - Fabrication of porous ceramics with unidirectionally aligned continuous pores, J. Am. Ce-ram. Soc. 84 (6) (2001) 1395–1397.
4) B. Li, K. Liu, C.R. Zhang, S.Q. Wang, - Fabrication and properties of borazine derived boron nitride bonded porous silicon aluminum oxynitride wave-transparent composite, J. Eur. Ceram. Soc. 34 (15) (2014) 3591–3595.
5) J.F. Yang, Y. Beppu, G.J. Zhang, T. Ohji, S. Kanzaki, - Synthesis and properties of porous single-phase β-SiAlON ceramics, J. Am. Ceram. Soc. 85 (7) (2002), 1879–1881.
6) C. Zhang, R. Janssen, N. Claussen, - Pressureless sintering of β-SiAlON with improved green strength by using metallic Al powder, Mater. Lett. 57 (2003)3352–3356.
7) S.-L. Hwang, I.-W. Chen, - Reaction hot pressing of α- and β-SiAlON ceramics, J. Am.Ceram. Soc. 77 (1994) 165–171.
8) F. Çalıskan, Improvement in sinte¬rability of β-SiAlON produced from kaolin, J. Alloy. Compd. 602 (2014) 14–149.
9) Z.Kovziridze, N.Nijharadze, G.Tabatadze, T.Chei¬shvili, Z.Mestvirishvili, E.Nikoeleishvili, M.Mshvil¬dadze, N.Darakhvelidze. Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes. //Journal of Electron-ics Cooling and Thermal Control, 2014, 4, 105-115. http://dx.doi.org/10.4236/jectc.2014.44012
10) Bradley A. Newcomb, Han G.Chae, - Handbook of Properties of Textile and Technical Fibres (Second Edition) 2018, Pages 841-871.
11) Z. Kovziridze, N. Nijharadze, G. Tabatadze, N. Da¬rakhvelidze, Z. Mestvirishvili, -Smart Materials in the System SiAlON-SiC-Al2O3-TiB2-ZrB2, Bit’s 2nd Annual World Congress of Smart materials 2016. p. 558. Singapore
12) Griffith A.A-phil, Trans. Roy. Soc. London A. 221.1920.1963.
13) Kovzirize Z. The Decomposition Stress Energy Formula. Georgian Ceramics Association, Journal "Ceramics and Advanced Technologies"#1 (39), 2018. pg. 11-23.
14) Z.Kovziridze. Failure Stress Energy Formula. Jour¬nal of Electronics Cooling and Thermal Conrtol. 2018.8.pp.31-47. Http: // www.scirp.org/journal/jectc.
15) SamsonovG.V., Physico-chemical Properties of Oxides, M., Metallurgy, 1978.
16) SamsonovG.V., Properties of High-melting-point Compounds, Short Reference Book. M., Metallurgy. 1978.
17) Kovziridze Z., NiJaradze N., Tabatadze G., Cheisvili T., Daraxvelidze N., Mestvirisvili Z., Msvildadze M., Nikoleisvili E. – Ob-taining SiAlON,s by Nitroalumthermal Processes, Georgian Ceramics Association, Journal "Ceramics and Advanced Tech-nologies", # 2 (32), 2014, pg. 23-31.
18) Z.Kovziridze, N.Nijharadze, G.Tabatadze, T.Cheishvili, Z. Mestvirishvili, E.NikoeleiShvili, M.Mshvil¬dadze, N.Darakhvelidze. - Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes. Journal of Electronics Cooling and Thermal Control, 2014, 4, pg. 105-115.http://dx.doi.org/10.4236/jectc.2014.44012
19) Enquan He, Jianshe Yue, Lei Fan, Chao Wang and Hongjie Wang, - Synthesis of single phaseb-SiAlON ceramics by reac-tion-bonded sintering using Si and Al2O3 as raw materials. doi:10.1016/j. scriptamat. 2011.03.040.
20) Peng Jiang, Xiao fang Wu,Wendong Xue, JunhongChen,Wei Wang,Yong Li; - In-situ synthesis and reaction mechanism of β-SiAlON in the Al-Si3N4-Al2O3compositematerial /http://dx.doi.org/10.1016/ j.ceramint. 2016.10.088.
21) Xing Deng, Xiangcheng Li, Boquan Zhu, Pingan Chen; - In-situ synthesis mechanism ofplate-shaped β-Sialon an ditseffect on Al2O3–Crefractory properties. http://dx.doi.org/10.1016/j.ceramint.2015.07.071
22) Z. Kovziridze. - The Formula of Dependence of Mechanical Characteristics of Materials on Crystalline Phase Composition in the Matrix. Advances in Materials Physics and Chemistry Vol.10 No.8, August 2020. ISSN: 2331-1959. DOI: 10.4236/ampc.2020.108013.
23) Z. Kovziridze. - Macro-Mechanical Properties Po¬rous Phase Dependence Formula. Journal of the Geor¬gian Ceramists As-socistion. Ceramics and Advanced Technologies.Vol. 20 1(39). 2018. Pp.28-34.
Volume 07 Issue 05 May 2024
There is an Open Access article, distributed under the term of the Creative Commons Attribution – Non Commercial 4.0 International (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/), which permits remixing, adapting and building upon the work for non-commercial use, provided the original work is properly cited.
Our Services and Policies
Authors should prepare their manuscripts according to the instructions given in the authors' guidelines. Manuscripts which do not conform to the format and style of the Journal may be returned to the authors for revision or rejected.
The Journal reserves the right to make any further formal changes and language corrections necessary in a manuscript accepted for publication so that it conforms to the formatting requirements of the Journal.
International Journal of Multidisciplinary Research and Analysis will publish 12 monthly online issues per year,IJMRA publishes articles as soon as the final copy-edited version is approved. IJMRA publishes articles and review papers of all subjects area.
Open access is a mechanism by which research outputs are distributed online, Hybrid open access journals, contain a mixture of open access articles and closed access articles.
International Journal of Multidisciplinary Research and Analysis initiate a call for research paper for Volume 07 Issue 07 (July 2024).
PUBLICATION DATES:
1) Last Date of Submission : 26 July 2024 .
2) Article published within a week.
3) Submit Article : editor@ijmra.in or Online
Why with us
1 : IJMRA only accepts original and high quality research and technical papers.
2 : Paper will publish immediately in current issue after registration.
3 : Authors can download their full papers at any time with digital certificate.
The Editors reserve the right to reject papers without sending them out for review.
Authors should prepare their manuscripts according to the instructions given in the authors' guidelines. Manuscripts which do not conform to the format and style of the Journal may be returned to the authors for revision or rejected. The Journal reserves the right to make any further formal changes and language corrections necessary in a manuscript accepted for publication so that it conforms to the formatting requirements of the Journal.