1Ng Soon King, 2Chua Hong Siang, 3Ting Sie King
1,2,3Faculty of Engineering, Computing and Science, Swinburne University of Technology, Sarawak, Malaysia
DOI : https://doi.org/10.47191/ijmra/v6-i11-33Google Scholar Download Pdf
ABSTRACT:
This research focuses on designing and simulating a sensorless control technique for optimising field-oriented control to achieve an optimization control applicable to water pressure regulation management. In the irrigation system, water pressure changes are determined by the number of activated emitters operating at different times. Unstable water pressure may reduce irrigation efficiency, leaving brown areas of the landscape not receiving adequate watering. Thus, the Field-oriented control technique is introduced in the paper to regulate the water pressure in the water pump controller using a permanent magnet synchronous motor (PMSM). The PSO-SFC field-oriented control technique for the PMSM was studied to improve motor efficiency and precision motor control over the torque and speed. The cascade-free state feedback controller (SFC) can achieve better dynamics and disturbance compensation in the controller. The SFC's tuning process has been achieved by using a linear-quadratic optimization method and PSO (particle swarm optimization) in the cascaded process. The process improves the coefficient of gain K produced by linear-quadratic optimization and PSO to obtain promising Q and R matrices in the adaptive system with improved output response in the simulation.
KEYWORDS:Field-oriented control; water pressure; permanent magnet synchronous motor; state feedback controller; particle swarm optimization
REFERENCES1) Dhanaraju, M., Chenniappan, P., Ramalingam, K., Pazhanivelan, S., & Kaliaperumal, R. (2022). Smart Farming: Internet of Things (IoT)-Based Sustainable Agriculture. Agriculture, 12(10), 1745. https://www.mdpi.com/2077-0472/12/10/1745
2) Ghoreishi, A., & Nekoui, M. (2012). Optimal Weighting Matrices Design for LQR Controller Based on Genetic Algorithm and PSO. Advanced Materials Research, 433-440, 7546-7553. https://doi.org/10.4028/www.scientific.net/AMR.433-440.7546
3) Ghoreishi, A., Nekoui, M., & Basiri, S. (2011). Optimal Design of LQR Weighting Matrices based on Intelligent Optimization Methods. International Journal of Intelligent Information Processing, 2. https://doi.org/10.4156/ijiip.vol2.issue1.7
4) Gopal B T, V. (2017). Comparison Between Direct and Indirect Field Oriented Control of Induction Motor. International Journal of Engineering Trends and Technology, 43, 364-369. https://doi.org/10.14445/22315381/IJETT-V43P260
5) Grofu, F. (2021). FIELD ORIENTED CONTROL (FOC) FOR BLDC MOTOR. Fiability & Durability / Fiabilitate si Durabilitate, 27(1), 124-129.
6) Kennedy, J., & Eberhart, R. (1995). Particle swarm optimization. Proceedings of ICNN'95-international conference on neural networks,
7) Neto, J. V. d. F., & Bottura, C. P. (1999, 6-9 July 1999). Parallel genetic algorithm fitness function team for eigenstructure assignment via LQR designs. Proceedings of the 1999 Congress on Evolutionary Computation-CEC99 (Cat. No. 99TH8406),
8) Paponpen, K., & Konghirun, M. (2015, 15-17 June 2015). LQR state feedback controller based on particle swarm optimization for IPMSM drive system. 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA),
9) Song, Z., Xiao, D., & Rahman, F. (2014). Online particle swarm optimization for sensorless IPMSM drives considering parameter variation. https://doi.org/10.1109/IPEC.2014.6869970
10) Szczepański, R., Tarczewski, T., & Grzesiak, L. M. (2020). PMSM drive with adaptive state feedback speed controller. Bulletin of The Polish Academy of Sciences-technical Sciences.
11) Zhao, Y. (2014). Position/Speed Sensorless Control for Permanent-Magnet Synchronous Machines University of Nebraska, Lincoln, NE]. DigitalCommons.
Volume 06 Issue 11 November 2023
There is an Open Access article, distributed under the term of the Creative Commons Attribution – Non Commercial 4.0 International (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/), which permits remixing, adapting and building upon the work for non-commercial use, provided the original work is properly cited.
Our Services and Policies
Authors should prepare their manuscripts according to the instructions given in the authors' guidelines. Manuscripts which do not conform to the format and style of the Journal may be returned to the authors for revision or rejected.
The Journal reserves the right to make any further formal changes and language corrections necessary in a manuscript accepted for publication so that it conforms to the formatting requirements of the Journal.
International Journal of Multidisciplinary Research and Analysis will publish 12 monthly online issues per year,IJMRA publishes articles as soon as the final copy-edited version is approved. IJMRA publishes articles and review papers of all subjects area.
Open access is a mechanism by which research outputs are distributed online, Hybrid open access journals, contain a mixture of open access articles and closed access articles.
International Journal of Multidisciplinary Research and Analysis initiate a call for research paper for Volume 07 Issue 05 (May 2024).
PUBLICATION DATES:
1) Last Date of Submission : 26 May 2024 .
2) Article published within a week.
3) Submit Article : editor@ijmra.in or Online
Why with us
1 : IJMRA only accepts original and high quality research and technical papers.
2 : Paper will publish immediately in current issue after registration.
3 : Authors can download their full papers at any time with digital certificate.
The Editors reserve the right to reject papers without sending them out for review.
Authors should prepare their manuscripts according to the instructions given in the authors' guidelines. Manuscripts which do not conform to the format and style of the Journal may be returned to the authors for revision or rejected. The Journal reserves the right to make any further formal changes and language corrections necessary in a manuscript accepted for publication so that it conforms to the formatting requirements of the Journal.